EchoStar PVR-5020, Руководство пользователя

Страница: 39 / 64

Description and Operation
www.echostar-int.com Page 2 - 19
©
20
04
Ech
o
S
tar
In
te
rn
ati
o
nal
C
o
rp
or
at
io
n
Al
l ri
g
h
ts
r
e
s
e
rv
e
d
SAT To define the satellite you want to search channels on.
Red: To save the data as entered in the database.
Tuner
(T1-T2 only) To define the tuner for the selected SAT.
Red: To save the data as entered in the database.
TP To define the transponder where you want to find the channel on.
Red: To save the data as entered in the database.
Blue: Direct access to the Add/Edit data menu; to add/edit a SAT or TP that is not listed
(for detailed information refer to the explanation of the Add/Edit data menu.
NOTE
You only need to change PIDs when your service provider changes or adds a channel.
A digital signal is basically broken up in Video and Audio information (PID) which are synchronized with the PCR PID.
Video PID To define the Video PID of the selected channel.
Red: To save the data as entered in the database.
Audio PID To define the Audio PID of the selected channel.
Red: To save the data as entered in the database.
PCR PID To define the PCR PID of the selected channel, if this is not known, select Auto.
Red: To save the data as entered in the database.
1. Search channels System setup - Fixed
System To select the system (dish) that you have installed.
Tuner
Tuner 1/Tuner 2
Loop-through
Twin
To select the tuner configuration that you want to use.
To search channels, only for the selected tuner.
To search channels for both tuners at the same time.
To search channels for both tuners at the same time
(Twin LNB) .
1. Search channels System setup - DiSEqC1.2
System To select the system (dish) that you have installed.
Tuner
Tuner 1/Tuner 2
Loop-through
Twin
To select the tuner configuration that you want to use.
To search channels, only for the selected tuner.
To search channels for both tuners at the same time.
To search channels for both tuners at the same time
(Twin LNB) .
CAUTION
On a motorized dish, set the physical East and West limit switches first. Failing to do so might cause damage to your
motorized dish installation or other properties.
Rotate To rotate the dish towards the East and West limit.