Echoflex Installation Guide
Dual Tech Vacancy Sensor
4.
Install the wall plate to the
mounting plate.
a.
Align the top of the wall
plate to the mounting
plate, angling the bottom
slightly.
b.
Hook the top of the wall
plate to the tabs located
on the mounting plate.
c.
Swing the wall plate
down, ensuring the neck
of the sensor extension
and wires feed through
the opening, until the
magnets engage.
d.
If the wall plate does not fully attach, wiggle the bottom of the
plate until all of the magnets are seated properly.
a
b
c
d
5.
Attach the sensor
head.
a.
Slide the
removable
cover off
the sensor
head.
b.
Route the
three
position
connector
with wiring
pigtail
through the
sensor
head.
c.
Loosen the set screw on the sensor retaining ring.
d.
Slide the sensor onto the ball socket, then tighten the set screw
until secure.
6.
Connect the three position connector to the receptacle on the sensor
electronics.
Dual Tech Wall-mount Vacancy Sensor
Page 5 of 12
Echoflex Solutions, Inc.
