Echoflex Installation Guide
Dual Tech Vacancy Sensor
Prepare for Installation
Elaho Dual Tech Wall-mount Vacancy Sensors ship with electronics, a
decorator style wall plate, and a termination kit. The sensor may be installed
into an industry standard back box (provided by others) or surface mounted
back box (sold separately and available from Echoflex).
Note:
Installation must follow all national and local codes for electrical
equipment.
Compliance
•
UL/cUL listed, complies with UL508A, UL916, and CSA C22.2 No. 14
•
CE compliant
For use with Echoflex dimming and relay products.
Environment
Ambient
For indoor, commercial controls use only. The sensor operates in ambient
temperatures of -10°C to 40°C, with a maximum of 90% non-condensing
humidity.
Installation
Echoflex recommends paying special attention to the installation
environment:
•
When operating in PIR only modes, the sensor must have an
unobstructed view of the room. Do not mount behind or near tall
cabinets, shelves, hanging light fixtures, etc.
•
Do not install the sensor within eight feet from an HVAC airflow
duct/vent.
•
Install the sensor where it cannot easily sense movement in areas
outside of the intended space, such as hallways, glass partitions, or
adjacent rooms.
Note:
In areas of increased noise activity, enabling PIR only mode may
allow for better occupancy detection results. See
DIP Switch Settings on
page 7
.
Dual Tech Wall-mount Vacancy Sensor
Page 2 of 12
Echoflex Solutions, Inc.
