40
Wartung und Pflege
Überprüfen der Zündkerze
Prüfen Sie den Elektrodenabstand. Der korrekte Abstand
beträgt 0,6 bis 0,7 mm.
Prüfen Sie die Elektrode auf Verschleiß.
Prüfen Sie den Isolierkörper auf Öl- oder andere
Ablagerungen.
Ersetzen Sie die Zündkerze ggf. durch eine neue, und ziehen
Sie sie mit 15 Nm - 17 Nm (150 kgf·cm - 170 kgf·cm) fest.
Schmieren der Antriebswelle
Überprüfen Sie die Antriebswelle alle 100 Betriebsstunden, und
schmieren Sie sie, falls erforderlich.
Winkelgetriebe
Entfernen Sie den Stopfen aus dem Winkelgetriebe.
Fügen Sie ggf. mit einer Fettpresse neues Fett hinzu.
Setzen Sie den Stopfen wieder ein.
Überprüfen des Messers
Verwenden Sie nur Messer, die vom Hersteller für dieses
Modell vorgesehen sind.
Wenn das Messer einen Riss aufweist, ersetzen Sie es sofort
durch ein neues.
Achten Sie darauf, dass das Messer gemäß den Anweisungen
montiert wird.
a: 0,6 - 0,7 mm
1. Antriebswelle
HINWEIS
Verwenden Sie ein hochwertiges Lithium-Mehrzweckfett.
1. Winkelgetriebe
2. Stopfen (Schraube)
HINWEIS
Verwenden Sie ein hochwertiges Lithium-Mehrzweckfett.
Das Gehäuse darf nicht übermäßig mit Fett gefüllt werden.
Содержание SRM-510ES
