![background image](http://html1.mh-extra.com/html/echo/shindaiwa-csg-7410es/shindaiwa-csg-7410es_service-manual_4132336060.webp)
ENGINE
CSG-7410ES
EC741S
58
F
G
H
K
H
J
d3
h1
E
M
N
7-10 Installing piston and cylinder (Continued)
Installing intake parts and cylinder
1. Insert intake pipe (K) into intake port of cylinder.
2. Place band (J) on intake bellows (H) as shown.
3. Place intake bellows (H) with band (J) on intake
port of cylinder to align mark (d3) on cylinder and
mark (h1) on intake bellows.
4. Secure intake bellows (H) with tightening band (J).
5. Inatall seal (G) and intake insulator (F) on intake
bellows (H).
6. Insert sleeve (E) into intake bellows (H).
7. Set new cylinder gasket on crankcase.
NOTE:
Completely remove old gasket residue on
mating surfaces of cylinder and crankcase before
setting new gasket.
8. Apply 2-stroke oil to piston rings (N) and internal
wall of cylinder.
9. Install piston in cylinder with arrow pointing as
shown.
NOTE:
When installing cylinder, it is convenient to
use Piston holder 897719-02830 to stabilize pis-
ton.
NOTE:
When installing piston in cylinder, do not
twist cylinder to avoid breakage of piston rings and
scoring cylinder bore.
10. Secure cylinder with 4 pre-coated bolts.
NOTE:
If the coat is peeled off, replace new one or
apply ThreeBond #1344 or equivalent. If old thread
locking sealant is left in threads, correct torque
may not be secured. In case old thread locking
sealant is left, remove it.
Содержание shindaiwa CSG-7410ES
