STARTER SYSTEM
CSG-7410ES
EC741S
11
2-2 Assembling starter assembly (Continued)
8. Install power spring (J) to rope reel (M) placing
hook (j1) of power spring into groove(m3) of rope
reel.
9. Apply small amount of lithium based grease to
inside (h1) of shaft (H).
10. Install shaft (H) on rope reel placing hook (j2)
into groove (h2).
11. Place cover (G) on starter case and tighten
with 4 screws (R).
12. Put washer(F) and pawl catcher (B) on cover (G).
13. Apply thread locking sealant (Loctite #263 or
equivalent) to nut (D) and tighten the nut (D) by
hand until it can not be turned further.
14. Pinch pawl catcher (B) with adjustable wrench
(C) as shown not to rotate pawl catcher (B).
NOTE:
Do not insert rod shaped tool between the
pawls of pawl catcher (B) to secure it, otherwise
damage of pawl catcher (B) may occur.
15. Tighten nut (D) with 10 mm socket wrench (E).
16. Reinstall starter case (A) to unit and secure
starter case (A) with 4 pre-coated bolts.
NOTE:
If the coat is peeled off, replace new one or
apply ThreeBond #1344 or equivalent. If old thread
locking sealant is left in threads, correct torque
may not be secured. In case old thread locking
sealant is left, remove it.
m3
j1
J
M
H
J
h2
h1
j2
lithium
F
G
R
Loctite#263
D
B
A
B
D
C
E
Содержание shindaiwa CSG-7410ES
