Echo shindaiwa CSG-7410ES, Руководство по обслуживанию, Страница: 46 / 74

HANDLE AND CONTROL SYSTEM
CSG-7410ES
EC741S
44
A
B
D
C
E
F
E
C
C
E
D
C
E
6-2 Replacing throttle system
1. Remove bolt (A) and rear handle cover (B).
2. Remove throttle lever (C), throttle lockout (D)
torsion spring (E) from rear handle. Remove car-
buretor before removing throttle rod (F) (Refer to
“4-5 Removing carburetor, fuel line and tank vent”).
3. Set torsion spring (E) on throttle lever (C) as
shown.
4. Install throttle lever (C) with torsion spring (E) to
rear handle as shown.
5. Push throttle lever (C) upward and then set
throttle lockout on rear handle (D) with hooking tor-
sion spring (E) to throttle lockout (D) as shown.
6. Put rear handle cover (B) on rear handle and
secure it with bolt (A).