![background image](http://html.mh-extra.com/html/echo/sc-4213/sc-4213_operators-manual_532442011.webp)
7
3 INCH CHIPPER/SHREDDER
Section
3
FEATURES & CONTROLS
Understanding how your machine works will help you achieve the best results when using your chipper/shredder. The
following descriptions define the features and controls of your machine.
REFER TO ENGINE OWNER’S MANUAL FOR FURTHER ENGINE OPERATING INSTRUCTIONS.
1. SHREDDER CHUTE
Materials no larger than 3/4" (1.9 cm) in diameter are fed
through the shredder chute to the shredder knives.
2. CHIPPER CHUTE
Materials no larger than 3" (7.6 cm) to be chipped are fed
through the chipper chute to the chipper blades.
3. ENGINE THROTTLE
This controls the speed of the engine. Increase the throttle by moving the lever to the FAST position. To decrease
the throttle, move the lever to the SLOW position.
4. ENGAGEMENT HANDLE
During engine start-up, the engagement handle
must be in the disengaged (UP) position. With the
engine at 1/4 throttle, carefully engage the rotor
by slowly pushing the engagement handle down,
allowing the rotor to speed up gradually. Engaging
the chipper too quickly with the engine at full or half
throttle will bog down the engine and will shorten
the life of the belt. See Sections 4.2 and 4.4.
5. ENGINE CHOKE
Use when starting a cold engine. Move lever to the
choke position when starting. Move lever to the run
position when engine is running. Refer to engine
manual for further engine operating instructions.
Figure 3.1, Start Position Belt Disengaged
Figure 3.3
Figure 3.2, Operating Position Belt Engaged
ENGLISH
Содержание SC-4213
Страница 30: ...26 3 INCH CHIPPER SHREDDER ...
Страница 31: ......