11
3 INCH CHIPPER/SHREDDER
Section
To prevent personal injury or property damage: shut
off engine and make sure that all moving parts have
come to a complete stop before, servicing, adjusting or
repairing. Disconnect the battery and remove ignition
key where applicable.
WARNING
5
SERVICE & MAINTENANCE
The items listed in this service and maintenance schedule
are to be checked, and if necessary, corrective action
taken. This schedule is designed for units operating under
normal conditions. If the unit is operating in adverse or
severe conditions, it may be necessary for the items to be
checked and serviced more frequently.
SEE ENGINE OWNER’S MANUAL FOR FURTHER
ENGINE MAINTENANCE AND TROUBLESHOOTING
INFORMATION.
SERVICE AND MAINTENANCE SCHEDULE
FREQUENCY
COMPONENT
MAINTENANCE
REQUIRED
REFER TO ENGINE
OPERATOR’S
MANUAL
BEFORE
EACH
USE
EVERY 8
HOURS
EVERY
25
HOURS
EVERY
50
HOURS
EVERY
YEAR
Engine oil
Change (1)
●
Fuel filter
Replace
●
Spark plug
Check condition and gap
●
Engine oil
Check/fill
●
Fuel tank
Check/fill
●
All internal and external
nuts and bolts
Check tightness
●
Chipper blades
Check sharpness and re-
torque to 25 ft-lbs. (2)
●
Shredder knives
Check condition
●
Spark arrestor*
Clean
●
Entire machine
Clean
●
Drive belt
Check
●
Belt tension
Check
●
Belt/pulley alignment
Check
●
Grease zerks
Lube
●
Wheel bearings
Check
●
(1) Perform more frequently under extremely dusty conditions.
(2) Perform more frequently when chipping dry or dirty wood.
*If equipped
As the Limited Warranty states, failure by the Owner to perform normal maintenance will void the machine’s warranty. The aggressive,
high-speed nature of chipping REQUIRES THE OWNER TO PERFORM THE ABOVE LISTED NORMAL MAINTENANCE. Special
consideration to maintain and re-torque the CHIPPER ANVIL, CHIPPER BLADES, AND ALL INTERNAL AND EXTERNAL NUTS AND
BOLTS is the sole responsibility of the Owner. Failure by the Owner to do so shall be cause for denial of warranty.
5.1 MAINTENANCE SCHEDULE
ENGLISH
Содержание SC-4213
Страница 30: ...26 3 INCH CHIPPER SHREDDER ...
Страница 31: ......