manualshive.com logo in svg

Echo PPFD-2400 TYPE 1/1E, Руководство оператора

Поделиться
Скачать
Echo PPFD-2400 TYPE 1/1E Скачать руководство пользователя страница 6

6

PERSONAL

 

CONDITION

 

&

 

SAFETY

 

EQUIPMENT

WARNING          DANGER

Power Pruner users risk injury to themselves and others if the Power Pruner is used improperly and or safety
precautions are not followed.  Proper clothing and safety gear must be worn when operating a Power Pruner.

Physical Condition --

Your judgment and physical dexterity may not be good:

• if you are tired or sick,
• if you are taking medication,
• if you have taken alcohol or drugs.

Operate unit only if you are physically and mentally well.

Eye Protection --

Wear eye protection that meets ANSI Z87.1 or CE requirements
whenever you operate the Power Pruner.

Face & Head Protection --

When trimming overhead, always wear head protection meeting ANSI
Z89.1 and CE requirements with a full face shield.  Head protection with
full face shield will help protect you from falling branches and debris.

Hand Protection --

Wear no-slip, heavy duty work gloves to improve your grip on the
Power Pruner handles.  Gloves also reduce the transmission of machine
vibration to your hands.

Hearing Protection --

Echo recommends wearing hearing protection whenever unit is used.

Proper Clothing --

Wear snug fitting, durable clothing;

• Pants should have long legs, shirts with long sleeves.
• DO NOT WEAR SHORTS,
• DO NOT WEAR TIES, SCARVES, JEWELRY.

Wear sturdy work shoes with non-skid soles;

• DO NOT WEAR OPEN TOED SHOES,
• DO NOT OPERATE UNIT BAREFOOTED.

Содержание PPFD-2400 TYPE 1/1E



































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды