P
OWER
P
RUNER
O
WNER
'
S
M
ANUAL
19
DETERMINE
OPERATION
AREA
• Before staring the unit, equip yourself and fellow workers in the 15 M
(50 ft.) safety zone with the required protective equipment and
clothing.
• Review the area to be trimmed. Look for hazards that could
contribute to unsafe conditions.
• Spectators, children and animals must be prevented from coming
nearer than 15 M (50 ft.) while the pruner is in use.
A
B
C
D
O
PERATION
• Provide all operators of this equipment with the Operator's Manual
and instructions for safe operation.
• Before starting the unit, equip yourself and any other person
working within the 15 M (50 ft.) Safety Zone with the required
Protective Equipment and clothing.
• Always evaluate the area being cut for overhead hazards such as
dead branches which may fall and strike the operator or helpers.
• Be aware of branches bouncing when striking the ground.
• Larger branches should be removed in sections.
• During operation, the complete unit, especially the shaft tube and the
bearing housing may become very hot, too hot to touch. Avoid
contact during and immediately after operation.
1.
Stop Switch - Start/Run.
Move stop switch button (A) forward away from the STOP
position.
2.
Choke - Cold Start.
Move choke (B) to “Cold Start” Position.
3.
Primer Bulb -Primer.
Pump primer bulb (C) 10 times. Fuel will be visible and flow freely in
the clear fuel tank return line.
STARTING
COLD
ENGINE
WARNING DANGER
The cutting attachment should not rotate at idle. If cutting
attachment rotates, readjust carburetor according to "Carburetor
Adjustment" instructions in this manual or see your dealer,
otherwise serious personal injury may result.
15 M
(50 ft.)
