16
B
AIR
FILTER
Level 1.
Tools required:
25 or 50 mm (1 or 2 in.) Cleaning brush
Parts required:
Air Filters
1.
Close choke (Cold Start Position [
]). This prevents dirt from
entering the carburetor throat when the air filters are removed.
Brush accumulated dirt from the air cleaner area.
2.
Unsnap the air filter cover latch(A), and open the air filter cover (B).
3.
Clean the foam filter in water/detergent solution. Wrap the foam
filter in a clean cloth and squeeze (do not wring) dry. Do not oil
foam filter. Lightly brush debris from felt filter.
NOTICE
If elements are fuel soaked, very dirty, deformed, or torn, replace,
otherwise engine damage may occur.
4.
If elements can be cleaned and reused, be certain they:
•still fit the cavity in the air cleaner cover.
•are installed with the original side out.
FUEL
FILTER
Level 1.
Tools required:
200- 250 mm (8 - 10 in.) length of wire with one end
bent into a hook, clean rag, funnel, and an approved
fuel container.
Parts required:
Fuel Filter
WARNING
DANGER
Fuel is VERY flammable. Use extreme care when mixing, storing or
handling.
1.
Use a clean rag to remove loose dirt from around fuel cap and
empty fuel tank.
2.
Use the “fuel line hook” to pull the fuel line and filter from the
tank.
3.
Remove the filter from the line and install the new filter.
C
A
D