6
EQUIPMENT
WARNING
DANGER
Use only ECHO approved attachments. Serious injury may result from the use of a non approved attachment combi-
nation. Read and comply with all safety instructions listed in this operator manual. ECHO, INC. will not be respon-
sible for the failure of attachments or accessories which have not been tested and approved by ECHO.
• Check unit for loose/missing nuts, bolts, and screws. Tighten and/or
replace as needed.
• Inspect fuel lines, tank, and area around carburetor for fuel leaks. DO
NOT operate unit if leaks are found.
• Check that the auger is firmly attached and in safe operating condi-
tion.
• Ice blades are very sharp. Wear gloves when handling or replacing.
• Do not use any attachment, accessory, or replacement part unless it
is recommended in the Operator's Manual.
• Have repairs done only by an authorized ECHO Service Dealer.
E
MISSION
C
ONTROL
The emission control system for this engine is EM (Engine Modification).
Emission Control Label (located on Engine) (EXAMPLE ONLY, information on label varies by FAMILY). Check
the label on your unit for information specific to your model.
IMPORTANT ENGINE INFORMATION
ENGINE FAMILY : 5EXHS.0434RA
DISPLACEMENT : 42.7cc
THIS ENGINE MEETS U.S. EPA PH1 EMISSION
REGULATIONS FOR SMALL NON-ROAD ENGINES.
REFER TO OWNER’S MANUAL FOR MAINTENANCE
SPECIFICATIONS AND ADJUSTMENTS.
PRODUCT EMISSION DURABILITY
The 300 hour emission durability compliance period is the time span selected by the manufacturer certifying the
engine emissions output meets applicable emissions regulations, provided that approved maintenance procedures are
followed as listed in the Maintenance Section of this manual.
