Echo DPB-2600, Руководство оператора

Страница: 20 / 140

18
Starting and Stopping
Starting and Stopping
Starting the unit
1. Move cruise control lever all the way forward to stop position.
2. Push power button once to turn on power to unit.
3. Depress trigger switch to increase blower speed.
Stopping the unit
1. Cruise control lever
Release trigger switch and move the cruise control lever
completely forward (Stop position), and allow blower to
stop.
2. Push power button to turn off power to unit.
∗
If the power button does not stop the blower, remove the bat -
tery to stop the power supply to blower. Have your authorized
ECHO servicing dealer repair power button before using blow
-
er again. If the blower does not stop when the trigger is re -
leased and the cruise control lever is moved completely
forward (Stop position), remove the battery to stop the power
supply to blower. Have your authorized ECHO servicing deal
-
er repair unit before using again.
WARNING
 When starting the unit, observe the precautions described from Page 4 in the section "For safe use of your product"
to ensure that you operate the product correctly.
 Failure to observe the precautions could cause an accident or injury, or even lead to a fatality.
INPORTANT
 Use the tool and battery in temperatures between 0°C (32°F) and 40°C (104°F).
1. Cruise control lever
NOTE
 Power indicator LED illuminates when power to unit is
turned on.
2. Power button 4. Trigger switch
3. Power indicator LED
IMPORTANT
When power to the unit is turned on:
 After 90 seconds of inactivity, unit will power itself off.

If the LED remains lit, operation is normal.
 If the LED flashes once per second, the battery needs to be
charged.
 If the LED flashes four times per second, there is a fault with -
in the product. Turn power off to unit. Remove battery. Clear
debris from around fan. Install battery. Turn power on to unit.
If flashing continues, have your authorized servicing dealer
repair the product.
1. Cruise control lever
2. Power button 3. Power indicator LED
4. Trigger switch
NOTE
 Power indicator LED turns off when power to unit is turned
off.