![Echo BEAR CAT EGI-2000 Скачать руководство пользователя страница 16](http://html.mh-extra.com/html/echo/bear-cat-egi-2000/bear-cat-egi-2000_operation-manual_532513016.webp)
16
prE
-
opEratIon
ENGINE OIL
OIL LEVEL
The generator has been shipped without engine oil. Do not start the
engine until full with the sufficient engine oil.
Do not tilt the generator when adding engine. This could result in
overfilling and damage to the engine.
Recommended engine oil:
SAE 10W -30
Recommended engine oil grade:
API Service SE type or higher
Engine oil quantity:
0.35 L (0.42 US qt, 0.35 lmp qt)
1. Place the generator on a level surface.
2. Remove the screws (1), and then remove
the cover (2).
3. Remove the oil filler cap (3).
4. Fill with the specified amount of the
recommended engine oil, and then install
and tighten the oil filler cap.
5. Install the cover and tighten the screws.
17
16
Inverter Generator Owner's Manual
Pre-oparation
Engine Oil
The generator has been shipped without engine oil. Do not start the
engine till fill with the sufficient engine oil.
Do not tilt the generator when adding engine. This could result in
overfilling and damage to the engine.
Oil level
Recommended engine oil:
SAE 10W -30
Recommended engine oil grade:
API Service SE type or higher
Engine oil quantity:
0.35 L (0.42 US qt, 0.35 lmp qt)
Inverter Generator Owner's Manual
Pre-oparation
Pre-oparation
NOTICE
Pre-operation checks should be made each time
operation.
!
WARNING
The engine and muffler will be very hot after the engine has
been run. Avoid touching the engine and muffler while they
are still hot with any part of your body or clothing during
inspection or repair.
Fuel
!
WARNING
Fuel is highly flammable and poisonous. Check
SAFETY INFORMATION”(See page 2-5) carefully
before filling.
Do not overfill the fuel tank, otherwise it may overflow
when the fuel warms up and expands. After fill the fuel,
make sure the fuel tank cap is tightened securely.
Immediately wipe off spilled fuel with a clean.
Use only unleaded gasoline. The use of leaded gasoline
will cause severe damage to internal engine parts.
“
Remove the fuel tank cap and fill to the red mark.
Recommended fuel: Unleaded gasoline
Fuel tank capacity: Total: 4.0l (1.06 US gal, 0.88 lmp gal)
Red line
Fuel level
1. Place the generator on a level
surface.
2. Remove the screws
, and
then remove the cover
.
3. Remove the oil filler cap
.
4. Fill with the specified amount
of the recommended engine
oil, and then install and tighten
the oil filler cap.
5. Install the cover and tighten
the screws.
③
17
16
Inverter Generator Owner's Manual
Pre-oparation
Engine Oil
The generator has been shipped without engine oil. Do not start the
engine till fill with the sufficient engine oil.
Do not tilt the generator when adding engine. This could result in
overfilling and damage to the engine.
Oil level
Recommended engine oil:
SAE 10W -30
Recommended engine oil grade:
API Service SE type or higher
Engine oil quantity:
0.35 L (0.42 US qt, 0.35 lmp qt)
Inverter Generator Owner's Manual
Pre-oparation
Pre-oparation
NOTICE
Pre-operation checks should be made each time
operation.
!
WARNING
The engine and muffler will be very hot after the engine has
been run. Avoid touching the engine and muffler while they
are still hot with any part of your body or clothing during
inspection or repair.
Fuel
!
WARNING
Fuel is highly flammable and poisonous. Check
SAFETY INFORMATION”(See page 2-5) carefully
before filling.
Do not overfill the fuel tank, otherwise it may overflow
when the fuel warms up and expands. After fill the fuel,
make sure the fuel tank cap is tightened securely.
Immediately wipe off spilled fuel with a clean.
Use only unleaded gasoline. The use of leaded gasoline
will cause severe damage to internal engine parts.
“
Remove the fuel tank cap and fill to the red mark.
Recommended fuel: Unleaded gasoline
Fuel tank capacity: Total: 4.0l (1.06 US gal, 0.88 lmp gal)
Red line
Fuel level
1. Place the generator on a level
surface.
2. Remove the screws
, and
then remove the cover
.
3. Remove the oil filler cap
.
4. Fill with the specified amount
of the recommended engine
oil, and then install and tighten
the oil filler cap.
5. Install the cover and tighten
the screws.
③
NOTICE
• Never operate the engine in a closed area or it may cause
unconsciousness and death within a short time. Operate the engine in
a well ventilated area. The generator has been shipped without engine
oil. Do not start the engine until filled with the sufficient engine oil.
Содержание BEAR CAT EGI-2000
