38
PLEASE NOTE: 20H IS FOR OUTDOOR PERMANENT INSTALLATIONS ONLY AND 20HI IS FOR INDOOR PERMANENT INSTALLATIONS ONLY. THIS MANUAL
AND ALL ECCOTEMP CONTENT IS SUBJECT TO CHANGE WITHOUT NOTICE. PLEASE VISIT WWW.ECCOTEMP.COM/SUPPORT FOR MORE INFORMATION.
Phone: 866-356-1992 | Email: [email protected] | Address: 315 - A Industrial RD Summerville, SC 29483
English
Support:
Eccotemp.com/help-desk
Shop Online:
Eccotemp.com/products
Store Locator:
Eccotemp.com/locator
Indoor unit must be installed with CAT 3
vent pipe in acc ordance with v ent supplier/
Manufacturer in acc ordance with loc al code.
Owner must refer to vent manufacturer’s
LQVWUXFWLRQVDQGVSHFLÀFDWLRQV=)OH[
LQIRUPDWLRQFDQEHIRXQGDWZZZQRYDÁH[
com, please refer to page 32 for additional
links.
A. BACK INSTALLATION
1. Insert the vent pipe through the installation
holes in the wall with the terminal sticking out.
2. Connect the elbow to the vent pipe and
water heater, moving straight backwards
until the expansion screws go into the holes
of the water heater. Screw the nuts tight
(pay attention to the direction of the elbow).
B. SIDE INSTALLATION:
1. Aim the holes in the water heater onto
the expansion screws, hang it up and screw
the nuts tightly.
2. Put the vent pipe through the holes in the
wall, and connect the elbow with the water
heater and vent pipe.
C. VERTICAL INSTALLATION
Please refer to local installation professional
or venting manufacturer:
The installation hole in the wall needs to
EHVHDOHGE\ÀUHUHWDUGDQWPDWHULDORUZDOO
thimble, making sure the water heater is tight
DQGZLOOQRWFRPHRර
Mounting the 20HI Water Heater
Make sure the location of the water heater allows for easy access
and operation.
In case of dry wall or concrete wall use dry wall anchors or lag bolts.
The water heater requires 120VAC/ 60Hz. Have a receptacle with
ground terminal near the water heater. The length of the power
supply cord is 5 feet.
'ULOOWKHKROHVDVSHUWKHVL]HVLQWKHÀJXUHWRWKHOHIWSXW
expansion screws into the top holes, and 2 rubber screws into the
bottom holes.
Hang up the water heater unit, tighten the expansion screws, and put
2 wood thread screws into the bottom holes.
CAUTION: Reinforcement of the wall is
UHTXLUHGLQFDVHWKHZDOOLVQRWVWURQJHQRXJK
to hold the water heater.
20HI Installation
µ
µ
