Page 3 of 7
The wiring for the permanent mount microbar is as shown in Figure 3 & 4. All wiring should be a minimum of 18AWG. The positive line must
have a 10 amp fuse, as shown. A switch may be used to control the on/off function.
Wiring Instructions
IMPORTANT! Disable power before wiring up the microbar.
+
-
SWITCH
(USER SUPPLIED)
FUSE (5A)
(USER SUPPLIED)
5517 SINGLE
RED - POSITIVE
BLACK GROUND
BLUE - DIM/FLASH SELECT
(ISOLATE WHEN NOT IN USE)
YELLOW - SYNC
(ISOLATE WHEN NOT IN USE)
FUSE (10A)
USER SUPPLIED
SWITCH
USER SUPPLIED
RED - POSITIVE
BLACK - GROUND
YELLOW - SYNC
(ISOLATE WHEN NOT IN USE
BLUE - DIM/FLASH PATTERN
(ISOLATE WHEN NOT IN USE
C
+
-
SWITCH
(USER SUPPLIED)
SWITCH
(USER SUPPLIED)
FUSE (5A)
(USER SUPPLIED)
5517 DUAL
RED - POSITIVE
COLOR 1
WHITE - POSITIVE
COLOR 2
BLACK GROUND
BLUE - DIM/FLASH SELECT
(ISOLATE WHEN NOT IN USE)
YELLOW - SYNC
(ISOLATE WHEN NOT IN USE)
FUSE (10A)
USER SUPPLIED
SWITCH
USER SUPPLIED
SWITCH
USER SUPPLIED
RED - POSITIVE
COLOR 1
WHITE - POSITIVE
COLOR 2
BLACK - GROUND
YELLOW - SYNC
(ISOLATE WHEN NOT IN USE
BLUE - DIM/FLASH PATTERN
(ISOLATE WHEN NOT IN USE
C
Figure 3
Figure 4
