HOW TO ACTIVATE THE LOCK REALESE FUNCTION
1.
Remove Jumper “FUNCTION” in the CP.
2.
Press and release button ( III )on the remote control.
3.
Return Jumper into its place. END.
4.
To restore, repeat step 1 to 3
and two “Click” sounds will confirm your selection.
HOW TO CANCEL THE SLOW DOWN SPEED AT THE END OF OPENING AND CLOSING
1.
Remove Jumper “FUNCTION” in the CP.
2.
Press and release button ( II )on the remote control.
3.
Return Jumper into its place.
4.
To restore the slow down feature repeat step 1 to 3
and two “Click” sounds will confirm your selection.
HOW TO ACTIVATE THE PHOTO SENSOR IN OPENING CYCLE
The photo sensor is active only during closure mode for safe closure. However, you can choose
to activate the photo sensor to be activated during opening mode as well in order to prevent the
gates from starting to open in case any car is standing too close to the gates. To activate the
photo sensor for opening mode do as follows:
1.
Remove the jumper “TIMER”
2.
Press and release the button ( IV ) on the remote control.
3.
Return the Jumper to its place.
Control Panel DCP-242V2
Summary of Programmable Features
Functionality of Jumpers;
“REMOTE” : For teaching or deleting remote controls.
“PROGRAM”: For choosing
Automatic
or
Set By Step
mode.
“ POWER” : For adjusting the force of the motors.
“FUNCTION”: For selecting; Single/Double gate, with/without Lock Release, Lock/Light relay
“TIMER” : For setting
Fast
and
Slow
time,
Time delay
in Auto-Close, with/without opening delay,
and for selecting type of invertors.
REMOTE
CONTROL’S
BUTTON
Jumper
FUNCTION
I
Double / Single Gate
II
With / Without Ramp Down
III
With / Without Lock Release
IV
Light / lock relay
REMOTE
CONTROL’S
BUTTON
Jumper
TIMER
I
Setting Fast and Slow time
II
Setting Auto Close Time Delay
III
With/Without opening delay
IV
W/WO PE sensor in opening
Manufactured by:
ECA Electronic Engineering Pty. Ltd. Australia.
465 Hawthorn Rd. Sth. Caulfield 3162 Vic. Tel:03-95720535 Fax:03-95720536
www.gatesonsolar.com
REMOTE
CONTROL’S
BUTTON
Jumper
PROGRAM
I
Step By Step program (o/s/c)
II
Automatic closure program
III
-
IV
-
REMOTE
CONTROL’S
BUTTON
Jumper
POWER
I
Max. Power
II
Min. Power
III
To Increase power by one level
IV
To Reduce power by one level
