DIGIITAL COMPUTERIZED CONTROL PANEL for 240V ac SWING GATE MOTORS
Model: DCP-242V2
The DCP-242V2 is a universal
C
ontrol
P
anel (
CP
) that can replace any 240V AC control panel for swing gates. It is very simple to
set the timers
remotely
and to choose the required operating program. The CP has a built-in learning type radio receiver that enables
the end user to teach the CP additional remote controls wirelessly, without the need of accessing the control panel.
Its sensitive rolling code receiver enables to operate the CP with a four-channel (TR-4RS) remote control from a distance of 200m’.
The DCP-242V2 has two options of operating programs from which the user can choose;
Automatic
or
Step By Step
.
Input Terminals:
No.1
:
+ 24V/AC / 60mA; power supply for photo sensor only.
No.2: - 24V/AC
No.3: Common output.
No.4: Common output.
No.5: Optic Sensor Input: Should be connected to Common contacts of an optic sensor.
No.6: PB1; Push Button input for manual operation.
No.7: PB2; Push Button input for pedestrian mode, manual operation.
No. 8: Com.
No. 9: STOP Optional inputs for Access Control Systems
No.10: CLOSE supplied upon request.
No.11: OPEN
No 12: contact of the relay output for electric lock or warning light.
No.13: contact of the relay output for electric lock or warning light.
240V AC Power Input:
Terminal No.
19:
Should be connected to neutrals 240VAC.
Terminal No.
20:
Should be connected to the live voltage; 240V AC 50Hz.
Electrical specifications:
Operating voltage: 240V/AC 50Hz. Output load: Max. 1.5Hp 240v/AC.
Main Fuse : 5A max / 240V AC. 24V Ac Fuse: 0.5A / 24V AC.
SW-240 INSTRUCTIONS
22
21
20
19
18
9
8
7
6
FORCE
240V AC
4A FUSE
Neutral - Input
220V live - Input
PROGRAM
REMOTE
Jumpers
Power Indicator
LED
NEUTRAL
LIVE - close
LIVE - open
17
16
AC MOTOR
1
23
AC MOTOR
2
FUNCTION
TIMER
5
4
3
2
11
10
1
24
25
2
4
V
A
C
*
Com.
STOP
Pedestrian
Com.
OPEN
CLOSE
Photo Sensor LED
N.O.
N.C.
NEUTRAL
LIVE - close
LIVE - open
* This 24V output should NOT be used for an electric lock
Digital Control Panel
240V AC Swing Gates
Model : DCP 242
ECA Electronic Engineering Pty, LTD.
Australia TEL: 03-95 72 0535
www.gatesonsolar.com
Com.
O/S/C
13
12
L
ig
h
t
R
e
la
y
/ L
o
c
k
N.O.
BP2
BP1
N.O.
N.O.
Remove bridge when
photo sensor is in use
24V / 0.5A
FUSE
-
+
N
C
N
O
C
M
Photo
Sensor
Rx
1 2 3 4 5
-
+
Photo
Sensor
Tx
1 2
Capacitor for M1
Capacitor for M2
14
15
Photo Sensor Input
Push buttons LEDs
Transf.
Elc. Lock
12V AC
240V AC
Optional inputs
upon request
