Chengdu Ebyte Electronic Technology Co., Ltd.
NB114 User Manual
Copyright ©2012–2023
，
Chengdu Ebyte Electronic Technology Co., Ltd.
7
DATA
Data transceiver
indicator
3 seconds before power-on: flash;
Wait for the network cable: always on;
There is data receiving and sending: blue
light and green light flash;
No data transmission: the light is off;
8
LINK
Link connection
light
Connection succeeded: the green light is on;
No connection: the light is off;
UDP mode is always on;
9
DC-IN
DC bus power
input
DC 8~28V input, do not input with Phoenix
terminal at the same time;
10
VCC
DC power input
3.81mm Phoenix terminal, DC 8~28V
positive pole, do not input DC head at the
same time;
11
GND
DC power output
3.81mm Phoenix terminal, DC 8~28V
negative pole, do not input DC head at the
same time;
12
Reload
Restore factory
key
Press and hold for 5 seconds to restore the
equipment;
13
Ethernet
network interface
Standard RJ45 interface;
[Note] When the network cable is not connected, PWR, DATA and LINK are all on, and the
device is in standby state.
