Ebyte E95M-DTU, Руководство пользователя

Страница: 20 / 29

Chengdu Ebyte Electronic Technology Co.,Ltd. E95M-DTU(400SLxx-xxx) User Manual
Copyright ©2012–2023, Chengdu Ebyte Electronic Technology Co.,Ltd.
20
in
reading
instructions in Section 9.1.
5.3 Factory default parameters
Factory default
parameter value
C0 00 09 00 00 00 60 00 23 03 00 00
Module model frequency address channel Air rate Baud rate
Serial port
format
transmittin
g power
E95M -DTU
(400SL 20-485)
433.125MHz 0x0000 0x 23 2.4kbps 9600 8N1 20dBm
E95M -DTU
(400SL 30-485)
433.125MHz 0x0000 0x 23 2.4kbps 9600 8N1 30dBm
6. AT Directive

AT instructions are used in configuration mode. AT instructions are divided into three categories: command
instruction, setting instruction and query instruction;

Users can go through the words " AT + HELP =?"Query to the AT instruction set supported by the module,
the AT instruction adopts the port rate of 9600 8N0;

When the input parameter exceeds the range, it will be limited. Please do not let the parameter exceed the
range to avoid the unknown situation.
6.1 The AT instruction sheet
command instruction description instance Example description
AT + IAP (Use carefully, see
article 6.3 serial port upgrade
firmware considerations)
Enter the IAP upgrade
mode
AT+IAP
Enter the IAP upgrade
mode
AT+RESET Equipment restart AT+RESET Equipment restart
AT+DEFAULT Configure the
parameters to restore
the default
And the device
restarted AT+DEFAULT Configure the parameters
to restore the default
And the device restarted
Set instructions description instance Example description
AT+UART=baud,parity Set the port rate and check AT+UART=3,0 Set the port rate to
9600,8N0
AT+RATE=rate Set air rate AT+RATE=7 Set the air rate to 62.5K