Ebyte E95M-DTU, Руководство пользователя

Страница: 16 / 29

Chengdu Ebyte Electronic Technology Co.,Ltd. E95M-DTU(400SLxx-xxx) User Manual
Copyright ©2012–2023, Chengdu Ebyte Electronic Technology Co.,Ltd.
16
4.3 Configuration Mode (Mode 2)
type When the M0 indicator is off, the M1 indicator lights on and the station works in mode 2
launch Wireless configuration is available
receive Wireless configuration is available
configure The user can access the register to configure the radio operating status
5. Register read and write control
5.1 Instruction format
Under the configuration mode (mode 2: M 1 = OFF, M 0 = ON), the supported instruction list is as follows (when setting, only
9600,8N1 format is supported):
orde
r
num
ber
instruction format define
1 Set the register
Instructions: C0 + starting a parameter
Response: C1 + starting a parameter
Example 1: The configuration channel is 0x09
Command start address length parameter
Send to: C0 05 01 09
Return: C1 05 01 09
Example 2: simultaneously configure the module address (0x1234), network address (0x00), serial
port (9600 8N1), empty speed (2.4K)
Send to: C0 00 04 12 34 00 60
Return: C1 00 04 12 34 00 60
2 Read the register
Instructions: C1 + starting a length
Response: C1 + starting a parameter
Example 1: Read the access channel
Command start address length parameter
Send to: C1 05 01
Return: C1 05 01 09
Example 2: Read the module address, network address, serial port, and empty speed
simultaneously
Send to: C1 00 04
Return: C1 00 04 12 34 00 60
3
Set up the temporary
register
Instructions: C2 + starting a parameter
Response: C1 + starting a parameter
Example 1: The configuration channel is 0x09
Command start address length parameter
Send to: C2 05 01 09
Return: C1 05 01 09