ADU-2110A USB ADSL Modem
Quick Installation Guide
Version 1.0
Thank you for purchasing PLANET USB ADSL Modem,
ADU-2110A. In this installation guide, it illustrates the driver in-
stallation steps for Windows 98SE, ME, 2000, or XP. For more
information, please also refer to the
User
’
s manual
.
Package Content
ADU-2110A USB ADSL Modem
x 1
Quick Installation Guide
x 1
Drivers and User
’
s Manual CD
x 1
USB Cable x 1
RJ-11 Cable x 1
Before Installation
The USB ADSL modem support the following two modes
l
WAN mode support:
n
PPP over ATM LLCSNAP/VCMUX (RFC 2364)
n
PPP over Ethernet LLCSNAP/VCMUX (RFC 2516)
l
LAN mode support:
n
Classical IP over ATM (RFC 1577)
n
Bridged IP over ATM LLCSNAP/VCMUX (RFC
1483)
You must get the connection mode and following data from your
ISP or phone company to set up ADU-2110A.
ADSL WAN (PPPoE/PPPoA) mode user
l
VPI/VCI value
l
Encapsulation mode (example: RFC 2364 PPPoA, RFC
2516 PPPoE...etc.)
l
Username and password for authentication
ADSL LAN mode user
l
VPI/VCI value
l
Encapsulation mode(example: RFC 1483, 1577...etc.)
l
IP Address, Subnet Mask
l
Gateway, DNS related information
Step I: Hardware Installation
1. Turn on your PC
2. Connect the provided RJ-11 cable into
LINE port on the real
panel of the modem and insert the other end to splitter.
3. Connect the Type-A end of USB cable to your PC.
4. Insert bundled USB driver CD into your CD-ROM drive and
follow instruction to install ADU-2110.
Step 2: Driver Installation for both LAN and
WAN mode
The following list of driver installation procedures are Windows
98SE, ME, 2000, and XP.
Driver Installation on Windows 98SE/ME
1. When detect new hardware window appears, click
“
Cancel
”
.
2. Insert
“
Easy Setup Software Kit
”
, front page of Easy Setup
window will appear. Install Driver: Click here to install ADSL USB
modem driver.
3. Click
“
Install Driver
”
and then select the country you are at.
PS. If your country is not on the list, please click
“
G
”
to next page.
4. After finish country selecting, the window below will appear.
Select the ISP, and then click
“
}}
”
to next page.
5. Enter your account
“
User Name, Password and Password
Confirm
”
then click
“
}}
”
to next page.
6. Confirm modem settings and click
“
}}
”
to next page.
7.
Software kit searches available USB modem
Networking & Communication
