CC1310 Wireless Module
E70 Series User Manual
Copyright ©2012–2017, Chengdu Ebyte Electronic Technology Co., Ltd.
11
/
34
17
TXD
Output
TTL serial port output connecting to external RXD input pin. It can be configured as
open-drain or push-pull input, please refer to Parameter setting. An external 1k protective
resistor shall be connected in series when in use.
18
TCKC
Input
JTAG TCKC
19
TMSC
Input
JTAG TMSC
20
RXD
Input
TTL serial port input connecting to external TXD pin. It can be configured as open-drain or
high pull input, please refer to Parameter setting. An external 1k protective resistor shall be
connected in series when in use.
21
M1
Input
M2, M1, M0 together decide the 8 kinds of working modes;
An external 1k protective resistor shall be connected in series and a 1M pull-up resistor shall
be added when in use.
(Cannot be floated, but it can be grounded when not used)
22
M0
Input
M2, M1, M0 together decide the 8 kinds of working modes;
An external 1k protective resistor shall be connected in series and a 1M pull-up resistor shall
be added when in use.
(Cannot be floated, it can be grounded when not used)
23
GND
Ground
Ground electrode
24
ANT
Antenna (50Ω characteristic impedance)
3.2 E70 (433T14S)/ E70 (868T14S)/ E70 (915T14S)
3.2.1 Dimension
