EBS LX1NB-5L, Инструкция по установке и программированию

Страница: 16 / 24

LX1NB-5L Short manual Page 16 / 24
Delete all users
Command DELETEALLUSERS
Response
All users deleted
Single/Multiple SINGLE
This command can be used to delete all user numbers from the system.
Example: 1234 DELETEALLUSERS will empty the user number list
Configure output activation time
Command CONFIGOUTPUT=<seconds>
Response
Output configuration changed
or error message
Single/Multiple SINGLE
This command can be used to configure the time, for which the output will be
activated when a programmed user calls the system.
<seconds> should be any number greater than or equal to 0.
If <seconds> is set to 0, the output will function in toggle mode.
Example:
1234 CONFIGOUTPUT=5 will set the output activation time to 5 seconds.
1234 CONFIGOUTPUT=0 will set the output in toggle mode.
Configure callback
Command CALLBACK=<ON/OFF>
Response Callback configuration changed or error message
Single/Multiple SINGLE
This command can be used to determine, whether the system should call back a user
that has just called.
<ON/OFF> should be either ON or OFF word, depending on what configuration one
wishes to upload.
Example:
1234 CALLBACK=ON will enable the callback option
1234 CALLBACK=OFF will disable the callback option