EBS LX1NB-5L, Инструкция по установке и программированию

Страница: 15 / 24

LX1NB-5L Short manual Page 15 / 24
Verify user
Command USERCHECK=<phone number>
Response
User found / User not found
or error message
Single/Multiple SINGLE
This command can be used to check if a given number is already programmed in the
system.
<phone number> should be a phone number with the country code, but
without ‘00’ or ‘+’ prefix. Phone number length should not exceed 31 digits.
Example: 1234 USERCHECK=0789123456 will check whether number 07891234567 is
added to users list
Get all users list
Command GETALLUSERS
Response List of all users’ numbers programmed in the system
Single/Multiple SINGLE
This command can be used to get a list of all user numbers. Please note, that this will
send up to 500 numbers via SMS to the sender’s number. Maximum of 100 messages
(with 5 numbers per SMS) will be sent.
Example: 1234 GETALLUSERS will return a list of all programmed user numbers that
will look similar to this:
07891234567
07900800700
07555666777
07888999000
Delete user
Command USERDELETE=<phone number>
Response
No response
Single/Multiple MULTI
This command can be used to delete a programmed user number.
<phone number> should be a phone number with the country code, but
without ‘00’ or ‘+’ prefix. Phone number length should not exceed 31 digits.
Example: 1234 USERDELETE=07891234567 will delete number 07891234567 from
the users’ numbers list.