EBS LX1NB-5L, Инструкция по установке и программированию

Страница: 14 / 24

LX1NB-5L Short manual Page 14 / 24
Delete admin
Command ADMINDELETE=<index>
Response
No response
Single/Multiple MULTI
This command can be used to delete admin numbers under a given index.
<index> should be a digit from 0 to 4.
Example: 1234 ADMINDELETE=2 will delete administrator number saved under index
2.
Allow any number
Command ALLOWALL=<ON/OFF>
Response
AllowAll configuration changed
or error message
Single/Multiple SINGLE
This command can be used to allow any number to activate the relay by a call.
<ON/OFF> should be either ON or OFF word, depending on what configuration one
wishes to upload.
Please note, that this command does not delete any users’ numbers nor does it
disable the admin authorization.
Example: 1234 ALLOWALL=ON will authorize relay activation by a call from any
phone number
Add user
Command USERADD=<phone number>
Response
No response
Single/Multiple MULTI
This command can be used to add a new user’s phone number.
<phone number> should be a phone number with the country code, but
without ‘00’ or ‘+’ prefix. Phone number length should not exceed 31 digits.
Example: 1234 USERADD=07891234567 will add given phone number to the
authorized users list. Must be 11 digit numbers.