Installation instructions
ArgoDrive wheel change
AD-80.7
AD-100.12
AD-145.25
Article-Nr 14832 • 1.0 • en-us • Change • Release November 9, 2022 • page 3/11
ebm-papst St. Georgen GmbH & Co. KG • Hermann-Papst-Straße 1 • D-78112 St. Georgen
T49 (0) 7724 81-0 • Fax +49 (0) 7724 81-1309 • [email protected] • www.ebmpapst.com
4.2 Transportation and storage conditions
We recommend storing the impeller for no longer than 24
months in order to guarantee trouble-free operation and the
longest possible service life.
Max. permissible ambient
temp. (transport)
+70 °C
Min. permissible ambient temp.
(transport)
-40 °C
Max. permissible ambient
temp. (storage)
+55 °C
Min. permissible ambient temp.
(storage)
-25 °C
4.3 Ambient conditions
For the ambient conditions of the driving/steering system dur-
ing operation, please refer to the operating instructions of the
product for which this impeller is intended.
4.4 Scope of delivery
Ø80 – 8217200284
Scope of delivery
Num-
ber
Note
Impeller dia. 80x30
1x
cyl. screw hex. sock. M2.5x12 8.8
2x
Hexagonal screw ISO 4014 M8x40
10.9
1x
Bearing needle dia. 4x24.8
1x
To block the
impeller
Ø100 - 8217200283
Scope of delivery
Num-
ber
Note
Impeller dia. 100x40
1x
cyl. screw hex. sock. M2.5x12 8.8
2x
cyl. screw hex. sock. M6x45 12.9
6x
Ø145 - 8217200282
Scope of delivery
Num-
ber
Note
Impeller dia. 145x40
1x
cyl. screw hex. sock. M3x12 8.8
2x
cyl. screw hex. sock. M6x14 12.9
8x
cyl. screw hex. sock. M6x40 12.9
6x
4.5 Tools required
Ø80 – 8217200284
WAF13 open-ended wrench
Allen key WAF2
Torque wrench for the following tightening torques: 36 Nm
± 1 Nm
Ø100 – 8217200283
Allen key, WAF2, WAF5
Torque wrench for the following tightening torques: 16.5
Nm ± 1 Nm
Ø145 – 8217200282
Allen key, WAF2.5, WAF5
Torque wrench for the following tightening torques: 16.5
Nm ± 1 Nm
