Installation instructions
ArgoDrive wheel change
AD-80.7
AD-100.12
AD-145.25
Article-Nr 14832 • 1.0 • en-us • Change • Release November 9, 2022 • page 2/11
ebm-papst St. Georgen GmbH & Co. KG • Hermann-Papst-Straße 1 • D-78112 St. Georgen
T49 (0) 7724 81-0 • Fax +49 (0) 7724 81-1309 • [email protected] • www.ebmpapst.com
3
Intended use
The impeller may only be used for replacement in ArgoDrive
driving/steering systems from ebm-papst.
Any other usage above and beyond this does not conform to
the intended purpose and constitutes misuse of the product.
Customer equipment must be capable of withstanding the
mechanical and thermal stresses that can arise from this prod-
uct. This applies for the entire service life of the equipment in
which this product is installed.
3.1 Improper use
In particular, use of the product in the following ways is prohib-
ited and can be hazardous:
Operating the drive in technical systems for which there are
special requirements for failsafe performance.
Transporting people
Operating the driving/steering system in aircraft and space-
craft.
Operating the driving/steering system in residential envi-
ronments.
Operating the driving/steering system in railway, motor
vehicles and ships.
Operating the driving/steering system in potentially explo-
sive atmospheres (explosion protection area).
Operation in medical equipment with a life-sustaining or
life-support function.
All other applications not listed as intended uses.
4
Technical data
4.1 Product drawing
Ø145 – 8217200282
Ø100 – 8217200283
Ø80 – 8217200284
