EN
EN
www.ebi.eu
www.ebi.eu
6
7
Download the APP and log in
Connect the feeder with your smartphone
Make sure to turn on the WIFI
and Bluetooth before trying to
connect the device.
Open the APP.
Sign up or log in with your account.
Add the feeder
1. After log in you enter the main interface. Click [+] at the upper right corner to add the feeder
(As Fig.1, next page).
2. Tap the option ‘Lock & Camera’, then find the option ‘Smart Camera (Dual Band)’ (Fig 2).
Connect the feeder to the WIFI network
Follow the instructions in the APP to connect the device to your smartphone.
1. In the APP, click on add device or on the plus sign at the top right and choose Smart camera (wifi
or dual band) under the “camera & lock” category.
2. The APP asks to reset your device first. Therefore, press the WiFi button (middle) for 5 to 10 sec-
onds until you hear a long beep. The WiFi indicator on the device should flash blue and you should
hear a double beep every minute. If the indicator does not flash or you no longer hear this tone, first
press and hold the WiFi button to restart the process.
3. Then, in the APP, click on the option ‘Make sure the indicator is flashing….’ and then press ‘Next’
(Fig 1).
4. Select the available 2.4 GHz WiFi Network and type in the network password (Fig 2).
5. A QR code is created on your phone. Use the feeder’s camera to scan it at a distance of ± 12-20
cm until you hear a ‘beep’. Click on the “I Heard a Prompt” option (Fig 3) to continue.
6.Wait for the devices to connect to each other (Fig 4-6).
7. When you see “device added successfully”, click continue.
8. If everything went well, you will see the image from the camera in the video control menu (Fig 7).
Your device is now set up correctly.
Note:
The product is only suitable for 2.4Ghz network
Do not try to connect to the 5Ghz network.
Try to put the device near the router while binding
to ensure a quick connection.
Scan the QR code or search
for ‘Smart Life’ in the Apple
store or Google store to
download the APP.
Tip: Due to the upgrade and updates of
the APP. The operation in the APP will
be slightly different. Please follow up the
instructions in the APP to complete the
binding process.
The Feeder is ready to connect with APP
Connect to WIFI and fully Operational
Poor WIFI signal
WIFI Disconnected
Battery running low, (replace battery) powered by battery only
Flashing
Stay Solid
Flashing
Stay Solid
Flashing
Blue
Green
Red
Note:
One device can be
attached to only one
account at a time,
but one account can
connect to multiple
devices and used
on multiple phones.
1
3
2
4
5 GHz
5 GHz
2.4 GHz
2.4 GHz
2.4
GHz
WiFi
ONLY
