AQUMI
54
55
Add the device (AP mode)
1.
Click the “AP Mode” to the „AP” page. Press ‚Next Step” to continue.
2.
Select the home router and fulfill the password, press „Next” to continue.
3.
In standby mode, press the „FAN” key on the control panel (or remote control) 6 times within 4
seconds until the LCD screen show „CF” or „AP”, then you can make WIFI reset, there will be switch
between „CF” and „AP” if press many times.
4.
Select the AC Device with name „SmarLife-XXX” at the WLAN setting, then go back to the APP
interface.The APP will automatically do match.
4.
The APP software will automatically do the device match.
5.
After matching successfully, the page will display the prompt as below.
6.
You can “Rename” the device name as you like, or share with family, or press “Done” to start to
control the device.
