44
45
AQUMI
Note
•
Hold the bucket with both hands when emptying.
•
Note: When the bucket is full or removed from the unit, the compressor will turn off but the fan
will continue to run for a few minutes. This is completely normal. The unit will not be removing
moisture from the air at this time.
•
Note: During operation, it is normal for the unit to exhaust warm air from the top of the unit.
•
Caution: Do not place the bucket on the floor when it is full as it is uneven on the bottom and water
may spill.
Continuous drain
Connect the drain pipe on the back of unit, then the unit can continuous run without clean the bucket.
1.
Put the unit on level floor, unscrew the cap on the back of unit.
2.
Install the connector of drain and gasket.
3.
Install the drain pipe on connector.
4.
Press „POWER” button to run the unit.
Note!
If no need the function of continuous drain, please install the cap on the drain hole back of unit, then the
water will flow into bucket.
Note!
Please install the drain pipe follow below picture.
Please install the drain pipe correctly, or the water cannot drain from the pipe.
