EBENCH KH 6777, Руководство по эксплуатации

Страница: 28 / 66


D
V
D
/V
C
D
/S
-V
C
D
KH 6777
• Once for half the playback speed; “ 1/2” is displayed on
the television screen.
• Twice for one-fourth of the playback speed; “ 1/4” is
displayed on the television screen.
• Three times for one sixth of the playback speed; “ 1/6”
is displayed on the television screen.
• Four times for one seventh of the playback speed; “ 1/7”
is displayed on the television screen.
Please note:
Sound is not reproduced during slow playback.
2
To continue film playback at the selected point in normal
speed, press once the “Play” button on the front of the
DVD Player or on the remote control “ Play” is once again
displayed on the television screen.
Single Frame Forward (Step)
Please note:
This function may not be available on all DVDs/VCDs/
S-VCDs! If you try to carry out a function that is not
available, then the symbol is displayed on the tel-
evision screen.
Proceed in the following manner to advance a film of a loaded
DVD/VCD/S-VCD forward, frame-by-frame …
1 Press during play the “Pause/Step” button once to stop
play. The still picture of the chapter stopped, is displayed
on the television screen.
2 The still picture will then be advanced frame-by-frame
each time the “Pause/Step” button is depressed.
3 To return to film play press once the “Play” button on
the front of the DVD Player or on the remote control.
Enlarging the picture (Zoom)
Please note:
This function may not be available on all DVDs/VCDs/
S-VCDs! If you try to carry out a function that is not
available, then the symbol is displayed on the tel-
evision screen.
While the film on the loaded DVD/VCD/S-VCD is being
played it is possible to enlarge the picture on the televi-
sion screen in three stages by pressing on the “Zoom”
button on the remote control …
• Once for the first enlargement stage; “ 1” is displayed
on the television screen.
• Twice for the second enlargement stage: “ 2” is displayed
on the television screen.
• Three times for the third enlargement stage; “ 3” is dis-
played on the television screen.
To turn off the zoom function and return to a normal picture
size, press the “Zoom” button a fourth time; “ Off” is dis-
played on the television screen.
Changing the camera angle (Angle)
Please note:
This function may not be available on all DVDs/VCDs/
S-VCDs! If you try to carry out a function that is not
available, then the symbol is displayed on the tel-
evision screen.
Some films on DVD/VCD/S-VCD contain chapters which
were shot at different camera angles. When films contain
such chapters then the same chapter can be watched from
different angles.
Press the “Angle” button on the remote control while the film
of the loaded DVD/VCD/S-VCD is being played; the angle is
changed each time the “Angle” button is depressed.
Subtitle fade-in/fade-out
Please note:
This function may not be available on all DVDs/VCDs/
S-VCDs! If you try to carry out a function that is not
available, then the symbol is displayed on the tel-
evision screen.
If the film of the loaded DVD/VCD/S-VCD has subtitles, then
these can be displayed on the television screen by pressing
the “Subtitle” button on the remote control.
The subtitles will be displayed in the first available language
on the television screen when the “Subtitle” button is de-
pressed for the first time. The available languages are faded
in one after the other on the television screen each time the
“Subtitle” button is pressed.
“ “ is displayed on the screen, together with the number
of the currently faded-in language (e.g. “1/10” for the first of
ten subtitle languages).
When the last of the available subtitle languages has been
faded-in (e.g. “10/10” for the tenth of ten available subtitle
languages), then the subtitle function can be turned off by
depressing the “Subtitle” button on the remote control once
again; “
Off” is displayed on the television screen.
➧ For this subject please also refer to Chapter 13.1 “Subtitle
fade-in/fade-out”.
IB_KH6777_EN 23.09.2003, 0:56 Uhr 28