EBENCH KH 6777, Руководство по эксплуатации

Страница: 14 / 66

KH 6777 
The necessary cables for the subsequently described con-
nection method are available from your local dealer.
Check the operating instructions for the given audio compo-
nent whether it can be connected to a DVD Player …
• with a coaxial cable, or
• with an optical cable.
If both are possible then you are free to choose which con-
necting method you prefer.
Connection via coaxial cable
Proceed as follows to connect the DVD Player to a surround-
sound system with a digital coaxial cable …
1
2
1 Insert the coaxial cable plug into the “COAXIAL” socket
on the back of the DVD Player.
2 Insert the plug on the other end of the coaxial cable in
the corresponding socket of your Dolby Digital or DTS
amplifier.
Connection via optical cable
Proceed as follows to connect the DVD Player to a digital
audio component with an optical cable …
1
2
1
First remove the protective cover over the “Optical” socket
on the back of the DVD Player.
1
2
First remove the protective cover over the “Optical” socket
on the back of the DVD Player.Then insert the plug of the
optical cable in the “Optical” socket.
3
Insert the plug on the other end of the optical cable in the
corresponding socket of the digital audio component.
Please note:
When connecting an optical cable, ensure that no
dust or other dirt can enter the socket as this would
interfer with the signal.
Always return the protective cover over the optical
output when the optical cable has been disconnected
from the socket on the DVD Player!
.. Connecting digital audio-components
via analog cable
If the digital audio-component does not have a digital input,
then the DVD Player can also be connected via a conventional
analog chinch cable.
Proceed in the following manner to connect the DVD
Player with analog cables …
IB_KH6777_EN 23.09.2003, 0:56 Uhr 14