EBENCH KH 6777, Руководство по эксплуатации

Страница: 19 / 66

KH 6777 
confirm. The options available for the sub-item “Digital
Output” will be displayed on the television screen:
Raw
Set “Raw“ if a multi-channel, digital audio component
– e.g. a Dolby Digital or DTS receiver, or a 5.1-channel
surround-sound system – is connected to the DVD Player
via an optical or coaxial cable.
PCM
Set “PCM“ if two-channel digital audio components are
connected to the DVD Player via a coaxial cable.
Off
Set “Off” if no digital audio components have been con-
nected to the DVD Player.
6
Select with the control buttons and between the
options “Raw”, “PCM” and “Off”. Press the “OK” button once
to confirm the choice.
7
Press the control button three times to return to the
OSD menu bar, and then press the “Setup” button once
to fade out the OSD menu.
Speaker settings
For an optimal sound experience it is necessary to adapt
sound reproduction to …
• The connected audio components
• The spatial conditions at the point of installation of the
DVD Player/audio components, and
• Your personal preferences.
Please note:
The subsequent steps are only related to the con-
nection of a DVD Player to an audio component via
analog cables.
If you have opted for a digital connection …
• Connection via a coaxial cable, or
• Connection via an optical cable
… then the subsequently described speaker settings
do not have to be adjusted on the DVD Player, but
rather on the given audio component. Please refer to
the operating instructions for the given audio com-
ponent to find out how the settings are adjusted on
the given component.
Setting speaker sizes
Before changing the speaker settings:
Stereo-Downmix
The speakers have been works adjusted to the so-called
“Stereo-Downmix” setting:
Language Video Audio More Aud Parental
Size Distance Level
Front Large
Center Off
Rear Off
Subwoofer Off
If you have …
• connected a DVD Player to a stereo television and not
connected any audio components to the DVD Player,
or
• connected a Dolby Prologic-compatible amplifier, re-
ceiver or such a HiFi system to the stereo output of the
DVD Player (via chinch cable to the “FL” and “FR” chinch
sockets), as described in the Chapter “Connecting a HiFi
Symstem”, ...
... then do not change the works-adjusted Stereo-Downmix
settings!
Otherwise, if the settings are changed the sound when
playing DVDs, VCDs/S-VCDs, Audio- and MP3-CDs will
not be audible or only very quiet!
Proceed in the following manner to adjust speaker settings
when the DVD Player is connected to an audio component
with an analog cable …
1 In the event that a disc loaded in the DVD Player is being
played, then terminate playback by pressing the “Stop”
button on the front of the DVD Player or on the remote
control.
2 Call the OSD menu of the DVD Player by pressing the
“Setup” button on the remote control once. The OSD
menu with its menu items is displayed on the television
screen:
IB_KH6777_EN 23.09.2003, 0:56 Uhr 19