EBARA GS Series, Инструкция по эксплуатации, установке и техническому обслуживанию

Страница: 5 / 22

5
EBARA
PUMPS AMERICAS CORPORATION
www.pumpsebara.com
(t) 803.327.5005 (f) 803.327.5097
rev. 03/22
End Suction Centrifugal GS Series
2.1 PREPARATION AND TRAINING OF STAFF
The personnel involved in the installation, operation, maintenance and control of the equipment must
be properly trained so as to carry out their tasks as effectively as possible. The responsibility, skills and
supervision of the personnel fall within the remit of the employer. If the staff do not have the appropriate
knowledge, they must be duly trained. If required, the employer may receive proper training directly from
EBARA or from the distributor of this equipment.
2.2 MAINTENANCE
No technical or structural changes to the equipment are permitted without prior approval from EBARA.
Only genuine spare parts and accessories authorized by EBARA are suitable for meeting safety standards.
Rebuilding, modifying or using other spare parts may lead to the invalidation of your warranty.
Sound operation of the equipment depends on whether it is being used in accordance with the instructions
given in this instruction manual. The working conditions and limits set out in this manual may not be
exceeded in any way.
Always keep the nameplates legible and in good condition because the details shown will be needed for
future reference or to request spare parts.
3. TRANSPORT AND STORAGE
If necessary, the equipment must be handled and stored in appropriate packaging. It must not be stored
in damp environments with strong variations in temperature or in corrosive atmospheres. Condensates
may attack the seal areas, metal parts and its electrical operation. In this case, any claims made under the
warranty will be refused.
4. SPECIFICATIONS
Pump Tag:
1. Product code
2. Serial number
3. Flow rate
4. Head
5. PEI Value
6. Impeller Diameter
7. Motor Model
8. Motor HP
9. Motor Rotational Speed
10. Assembly Date
1.
2.
3. 4.
5. 6.
7.
8.
9.
10.