EBARA E-drive 11000, Руководство по эксплуатации и техническому обслуживанию, Страница: 32 / 34

32
10. Technical Assistance
For more technical information contact the technical service* providing the following information. The solution to the
problem will be found faster and easier if full information is provided.
model /serial code
LCD version (shown when E- drive is power
supplied)
LCD = _.__
INV version (shown when E- drive is power
supplied)
INV = _.__
Line Voltage: ___ [V] Line Frequency: 50 Hz 60 Hz
description of problem:
installation type: wall mounted on motor fan cover
motor type: single phase three phase
submersible surface
if submersible: cable lenght [m]: _____ if sommersible: cable section [mm
2
]:____
P2 motor [kW]:____ rated motor Volt [V]:___
rated motor Amp [A]:__ rated motor Hz:___
if single phase: capacitor
_____ [UF] if singlephase: starting Amp
I st = _____ [A] pump performances
Q = ____ [l/min]
H = ____ [m]
tank volume: _____ [liters] precharge pressure: _____ [bar]
number of DOL pumps: ___ number of COMBO pumps: ___
medium ambient temperature:
_____ [°C] pressure sensor
4 mA = ___ [bar]
20 mA = ___[bar]
digital inputs used:
digital ouputs used:
electric and hydraulic scheme of the system (more detailed as possible)
set parameters: please fill the instal. param. and adv. param columns in the software scheme.
* email : tcs@ebaraeurope.com , Tel .+39 0444 706869 o +39 0444 706811