EAW UXA4410 series, Руководство пользователя

Страница: 5 / 45

Tel 800 992 5013 / +1 508 234 6158
|
www.eaw.com
5
Line Array
Application Guide
EAW Passive Line Array Products - SB818P|F
Cable Chases
On front and
back conceal
wiring and
rigging for
clean look
18in Premium Transducer
With wicked long excursion
5.3in voice coil driver
Retractable Rigging
For groundstack
configuration
Back Grille
Optional back grille for
smooth, seamless look in
cardioid configurations
PERFORMANCE
Max SPL 1 137dB
Operating Range 2
32HZ–124Hz
Nominal Beamwidth 3 Horizontal 360° Vertical 360°
RMS Power Handling 4 1800W
Input Impedance LF
5 8Ω
CONFIGURATION
Subsystem LF
Transducer Loading
1x18in, 5.3in Voice Coil Vented
Operating Mode Amplifier Channels External Signal Processing
Single-amp 1 EAW DSP
NOTES
1 Calculated max SPL at 1m with 4:1 (12dB) crest factor pink noise. Specified as whole space (free field) for full range loudspeakers, half space for subwoofers.
2 Operating Range: Range where the processed Frequency Response stays within -10 dB SPL of the power averaged SPL within this range; measured on the
geometric axis. Narrow band dips are excepted.
3 Nominal Beamwidth: Design angle for the -6 dB SPL points, referenced to 0 dB SPL as the highest level.
4 Accelerated Life Test: Maximum test input voltage applied with an EIA-426B defined spectrum; measured with recommended signal processing and
Recommended Protection Filter.
5 Nominal Impedance: Selected 4, 8, or 16 ohm resistance such that the minimum impedance point is no more than 20% below this resistance over the
Operating Range.