Tel 800 992 5013 / +1 508 234 6158
|
www.eaw.com
41
Line Array
Application Guide
Rigging KF210
The assembly of two KF210 modules can be done following the steps below:
• On the first module, remove the pins [3], raise the retractable brackets [2] and fasten them
to the new position using the pins [3].
• Remove the pins [1] from the second module, place it on top of the first module, inserting
the brackets [2] as shown. Then fasten the front side of the two modules using the pins [1] of
the second module.
• On the back, remove the pins [5] from the rear brackets [4]. Then insert the movable arm [6]
of the second module into the bracket [4] of the first module. The next page shows in detail
the fastening of the angle on the rear between the two modules.
Содержание UXA4410 series
Страница 1: ...Application Guide Line Array...
