Eaton XV300 Series, Руководство пользователя

Страница: 27 / 103

2. Safety instructions
2.3 Device-specific hazards
2.3 Device-specific hazards
EXPLOSION HAZARD
Death, serious injury, and property damage may occur if the device is
being used in a potentially explosive (classified) location and, during oper-
ation, an electrical plug-in connection is disconnected or the device is
exposed to dangerous impacts or other types of dangerous mechanical
shock.
Use the device in the following environments only:
Non-hazardous (non-explosive) areas
Zone 22 hazardous areas (according to ATEX Directive)
Make sure that the device is not exposed to dangerous impacts and other
types of dangerous mechanical shock.
Do not operate the device in hazardous (classified) locations unless it is moun-
ted correctly.
De-energize the device before disconnecting plug connections.
EXPLOSION HAZARD
LITHIUM BATTERY
The lithium battery inside the XV300 may explode if handled incorrectly.
Dispose of the XV300 unit professionally.
CAUTION
DESTRUCTION
The XV300 should only be opened by the manufacturer or by an authorized
center. Operate the XV300 until only with the enclosure fully closed and
sealed.
CAUTION
ELECTROSTATIC DISCHARGE
Do not touch components (e.g., connector pins) that are electrostatic-sens-
itive.
Discharge any static electricity from your body before touching the HMI panel
(e.g., by touching an earthed metal object).
Electrostatic discharges may damage or ruin assembly parts. Because of
this, it is necessary to take precautions whenever handling the cards.
Please refer to the guidelines for electrostatic-sensitive components for more
information (ESD guidelines).
CAUTION
INTERFERENCES
The values specified in the technical data, as well as the device's elec-
tromagnetic compatibility (EMC), cannot be guaranteed if the following are
used: unsuitable cables, improperly assembled and terminated cables,
and/or wiring that does not conform to the applicable standards.
Only use cables assembled and terminated by professionals.
The cables being used must be assembled and terminated as required by
the port/interface description in this document.
When wiring the XV300 Touch Panel, follow all instructions regarding how
XV300 12/15 MN048017 EN www.eaton.eu
27