18
XSTORAGE HOME 3P USER MANUAL
MN700011EN December 2020 www.eaton.com
6. Control panel
6.1 General information
Figure 12. xStorage Home 3P display
1 – Power supply
•
LED on: the xStorage Home 3P is powered and is operating.
•
LED blinking: the xStorage Home 3P is in the start-up and self-test phase.
•
LED off: the xStorage Home 3P is not powered.
2 – General alarm
•
LED on: the xStorage Home 3P has detected a fault. The LCD display activates the corresponding alarm icon and shows
the information related to the alarm occurred on the status bar (see the "Troubleshooting" section).
•
LED off: the xStorage Home 3P has not detected any fault.
3 – Communication
•
LED on: communication with external devices is enabled.
•
LED off: communication with external devices is disabled.
4 – USB port
•
USB port available for data download, firmware update, Wi-Fi dongle connection.
5 – Graphic touch-screen display
•
Graphic touch screen display which displays the system status and user settings.
Do not connect portable hard disks, MP3 players, computers and any other device other than a USB memory stick or
Wi-Fi dongle to the USB port. The system is compatible with most of the USB memory sticks on the market. However,
the system may not recognize some types of USB memory sticks. In this case it is recommended to try again replacing
it with another model.
