5 Installation
5.4 Preparing the device for operation
50
MICRO PANEL XP-702
07/2011 MN04802003Z-EN
www.eaton.com
5.4.4
Mounting the active cooling unit
1
Connect the power supply for the active cooling unit on the device.
2
Position the active cooling unit on the device so that the expanding rivets are located on the device
mounting holes provided for this.
3
Push the four expanding rivets into the mounting holes.
Fig. 30 Power supply for the active cooling unit connected
Fig. 31 Active cooling unit positioned
Fig. 32 Active cooling unit mounted
www.comoso.com