5 Installation
5.4 Preparing the device for operation
48
MICRO PANEL XP-702
07/2011 MN04802003Z-EN
www.eaton.com
5.4.3
Fitting a hard disk in the device
1
Remove the hard disk slot cover (A).
Keep the hard disk slot cover.
CAUTION
Data loss
During a write operation to a CF card/hard disk, this may lose data or may be de-
stroyed if there is a power failure or if it is removed.
Only insert and remove CF cards/hard disk when the device is in a de-energized
state.
Always secure CF cards with the CF slot cover.
Before switching off:
-
Ensure that no software write operations to a CF card/hard disk are in progress
(«CF ACT» and «HD ACT» LEDs must not be lit).
-
Shut down the operating system.
If possible, avoid write operations to CF cards/hard disk. Reasons:
-
The number of write cycles possible on CF cards is limited.
-
A power failure during write operations will most likely lead to loss of data.
If the writing of the CF card/hard disk cannot be avoided, use an uninterruptible
power supply (USP) to prevent data loss.
Fig. 28 Hard disk slot cover (A)
www.comoso.com