manualshive.com logo in svg

Eaton XP-702 Series, Руководство по эксплуатации, Страница: 15 / 86

Поделиться
Скачать
Eaton XP-702 Series Скачать руководство пользователя страница 15

2 Device description

2.6 Designation

MICRO PANEL XP-702

07/2011 MN04802003Z-EN

www.eaton.com

15

Tab. 7 Accessories

2.6

Designation

Nameplate

A nameplate is fixed on the rear of the device in order to identify it. The nameplate contains the following
information:

Manufacturer address

Type designation

Power supply required

Part no. (Part-No or Art.-No)

Serial no.

Time of manufacturing (week/year)

Approval mark and information to the approval

Arrangement of interfaces and operating elements

Support

To ensure fast and optimum support always provide the support personnel with the following informa-
tion on the nameplate:

Part no. (Part-No or Art.-No)

Serial no.

Device accessories

Device accessories as replacement for 8.4" devices

4 Retaining brackets with threaded pin for mounting the device

1 Sealing strip for mounting the device

1 Power supply connector

ACCESSORIES-TP-84-IR-1

Device accessories as replacement for 10.4", 12.1" und 15" devices

8 Retaining brackets with threaded pin for mounting the device

1 Sealing strip for mounting the device

1 Power supply connector

ACCESSORIES-TP-15-IR-1

Cooling

Active cooling unit

ACCESSORIES-FAN-700-S

Accessories

Type

www.comoso.com

Содержание XP-702 Series























































































Отзывы:

Нет отзывов