Eaton UltraShift PLUS EO-11E406B-PV, Руководство по установке

Страница: 87 / 100

81
Line Inspection and End of Line
Line Inspection and End of Line
Line Inspection and Road Test Instructions
The checklist was developed as an installation tool for line personnel to ensure the correct operation of each vehicle and to assist
the vehicle OEM to identify transmission quality related issues as well as OEM line quality issues. Used correctly, this checklist
identifies transmission issues and aids in tracking the problem until corrected.
The recommended use of the checklist is as follows:
1. A separate checklist should be filled out for each vehicle built with Eaton transmissions. If these checks and information
can be combined with an existing form, the Line Inspection form does not need to be used.
2. The section identified as PRE-START CHECKS should be performed prior to the initial start-up of the vehicle. This
section ensures the transmission has the correct power supplies, sufficient lubricant, and correct transmission shift
tables.
3. Perform any necessary corrective action prior to the dyno or road testing.
4. The DYNO/ROAD TEST section is used to verify that all transmission systems are functional and the Drivers Manual and
Shift Label are supplied in the cab.
5. With a record of transmission related information and repairs made to each unit, the OEM is able to track and correct
repeated quality issues.
6. A copy of the checklist should be recorded for installation history. OEM line personnel should become familiar with the
checklist for the transmission prior to a scheduled build. Eaton OEM Engineering Support Group can coordinate training
and information to expedite this process.
This checklist represents a generic system which can be tailored to the individual OEM to achieve the best possible method of
transmission installation verification. Eaton recommends the use of this system to maintain the utmost in satisfactory operation
and long service life.
Each transmission system installed at the OEM shall pass the line checklist requirements per the Eaton Line Inspection Form
prior to shipment from the OEM plant.