![background image](http://html1.mh-extra.com/html/eaton/svx9000-series/svx9000-series_manual_4133346039.webp)
June 2006
CA04000006E
For more information visit:
www.EatonElectrical.com
39
SVX9000 Adjustable Frequency Drives
Enclosed Drives
Technical Data and Specifications
Table 55. Specifications
���
Some horsepower units include dynamic braking chopper as
standard — refer to individual drive sections.
Table 56. Standard I/O Specifications
Feature Description
9000X Enclosed Products —
NEMA Type 1 or NEMA Type 12
Primary Design Features
45 – 66 Hz Input Frequency
Standard
Output: AC Volts Maximum
Input Voltage Base
Output Frequency Range: Hz
0 – 320
Initial Output Current (IH)
250% for 2 seconds
Overload: 1 Minute (IH/IL)
150%/110%
Enclosure Space Heater
Optional
Oversize Enclosure
Standard
Output Contactor
Optional
Bypass Motor Starter
Optional
Listings
UL, cUL
Protection Features
Incoming Line Fuses
Optional
AC Input Circuit Disconnect
Optional
Line Reactors
Standard
Phase Rotation Insensitive
Standard
EMI Filter
Standard
Input Phase Loss Protection
Standard
Input Overvoltage Protection
Standard
Line Surge Protection
Standard
Output Short Circuit Protection
Standard
Output Ground Fault Protection
Standard
Output Phase Protection
Standard
Overtemperature Protection
Standard
DC Overvoltage Protection
Standard
Drive Overload Protection
Standard
Motor Overload Protection
Standard
Programmer Software
Optional
Local/Remote Keypad
Standard
Keypad Lockout
Standard
Fault Alarm Output
Standard
Built-In Diagnostics
Standard
Input/Output Interface Features
Setup Adjustment Provisions:
Remote Keypad/Display
Personal Computer
Standard
Standard
Operator Control Provisions:
Drive Mounted Keypad/Display
Remote Keypad/Display
Conventional Control Elements
Serial Communications
115V AC Control Circuit
Standard
Standard
Standard
Optional
Optional
Speed Setting Inputs:
Keypad
0 – 10V DC Potentiometer/Voltage Signal
4 – 20 mA Isolated
4 – 20 mA Differential
3 – 15 psig
Standard
Standard
Configurable
Configurable
Optional
Analog Outputs:
Speed/Frequency
Torque/Load/Current
Motor Voltage
Kilowatts
0 – 10V DC Signals
4 – 20 mA DC Signals
Isolated Signals
Standard
Programmable
Programmable
Programmable
Configurable w/Jumpers
Standard
Optional
Feature Description
9000X Enclosed Products —
NEMA Type 1 or NEMA Type 12
Input/Output Interface Features (Continued)
Discrete Outputs:
Fault Alarm
Drive Running
Drive at Set Speed
Optional Parameters
Dry Contacts
Open Collector Outputs
Additional Discrete Outputs
Standard
Standard
Programmable
14
1 (2 Relays Form C)
1
Optional
Communications:
RS-232
RS-422/485
DeviceNet™
Modbus RTU
CanOpen (Slave)
Profibus-DP
Lonworks
®
Johnson Controls Metasys™ N2
Standard
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Performance Features
Sensorless Vector Control
Standard
Volts/Hertz Control
Standard
IR and Slip Compensation
Standard
Electronic Reversing
Standard
Dynamic Braking
Optional
���
DC Braking
Standard
PID Setpoint Controller
Programmable
Critical Speed Lockout
Standard
Current (Torque) Limit
Standard
Adjustable Acceleration/Deceleration Standard
Linear or S Curve Accel/Decel
Standard
Jog at Preset Speed
Standard
Thread/Preset Speeds
7
Automatic Restart
Selectable
Coasting Motor Start
Standard
Coast or Ramp Stop Selection
Standard
Elapsed Time Meter
Optional
Carrier Frequency Adjustment
1 – 16 kHz
Standard Conditions for Application and Service
Operating Ambient Temperature
0 – 40°C
Storage Temperature
-40 – 60°C
Humidity (Maximum),
Non-condensing
95%
Altitude (Maximum without Derate)
3300 ft. (1000m)
Line Voltage Variation
+10/-15%
Line Frequency Variation
45 – 66 Hz
Efficiency
>96%
Power Factor (Displacement)
>.94
Description
Specification
6 – Digital Input Programmable
24V: “0”
)
10V, “1”
*
18V,Ri > 5 k
⏲
2 – Analog Input Configurable
w/Jumpers
Voltage: 0 – ±10V, Ri > 200 k
⏲
Current: 0 (4) – 20 mA, Ri = 250 k
⏲
2 – Digital Output Programmable
Form C Relays 250V AC 2 Amp or
30V DC2 Amp resistive
1 – Digital Output Programmable
Open collector 48V DC 50 mA
1 – Analog Output Programmable
Configurable w/Jumper
0 – 20 mA, impedance 500 ohms,
resolution 106 ±3%