![background image](http://html1.mh-extra.com/html/eaton/sts-2000a/sts-2000a_installation-and-operation-manual_4182300076.webp)
60
Eaton Static Transfer Switch 2000A 3-Pole Installation and Operation Manual 164001127—Rev 01
The
Ethernet Settings
panel in the
Settings
screen (
) allows the operator to set an IP address if a
different address than the DHCP address is required.
•
Address
is the Ethernet IP address of the Switch, which can be set directly or by DHCP.
–
If the
Use DHCP
has a green check mark (√), the DHCP address will be used for the IP address in
Address.
–
If the
Use DHCP
icon has a red X, DHCP is not used to set the IP address. Enter an IP address in
Address
for the Switch.
•
Press
Mask
to enter Ethernet IP mask address.
•
Press
Gateway
to enter Ethernet Gateway.
•
MAC
ID is set in the factory and cannot be changed.
•
Toggle
Use DHCP
button:
–
Green check mark: Use DHCP to assign IP address.
–
Red X: Do not use DHCP; use
Address
IP value.
•
Stat
button: shows communications statistics (a service function)
•
Restart
button: restarts the Monitor. On the ROI, the Mode of Operation must be set to
Redundant
so
that there is a backup transfer process during the restart.
NOTE
The Monitor must be restarted when
Ethernet Settings
change.
1111..33
TTiim
mee S
Seettttiinnggss
Time stamps are important data for log entries and alarms. The STS clock should be synchronized with clocks
in other equipment to accurately diagnose problems affecting multiple systems. You can set the STS clock
manually or with the Time Synchronization feature.
1111..33..11 M
Maannuuaall TTiim
mee S
Seettttiinngg
To manually set the clock, enter a date and time in
Time Settings
on the
Settings
screen
.
Press the
Set
button, which will bring up the
Keyboard
Screen. Enter time and date.
1111..33..22 TTiim
mee S
Syynncchhrroonniizzaattiioonn S
Seettttiinnggss S
Sccrreeeenn ((S
SN
NTTP
P))
The Time Synchronization feature with SNTP requires the STS Ethernet connection.
Prerequisites:
1.
1.The
Ethernet Settings
on the
Settings
screen must be configured.
2.
The Ethernet port must be connected to a network with a reachable time server supporting SNTP.
3.
You must have the IP address of the time server. The time server could be a dedicated timeserver possibly
with a GPS receiver, a local computer running time server software, or a timeserver on the Internet. You
should preferably use a local time server. All equipment related to the STS should use the same time
server if they have access.
Содержание STS 2000A
