![background image](http://html1.mh-extra.com/html/eaton/sts-2000a/sts-2000a_installation-and-operation-manual_4182300077.webp)
Eaton Static Transfer Switch 2000A 3-Pole Installation and Operation Manual 164001127—Rev 01
61
Figure 24. TIME Screen
Toggle
Use SNTP Server
to
the green check mark.
Server
: set IP address of time
server.
Zone
: time zone displaced from
UCT.
Get:
initialize time.
Set
: confirm date/time.
Save
save settings
To have the STS use Simple Network Time Protocol (SNTP), follow these steps:
1.
Press
Time
button at the bottom of the screen. The
TIME
screen displays (
).
2.
Press the
Server
button. Enter the time server’s IP address.
3.
Press the
Zone
button. Enter the time zone offset from Coordinated Universal Time (UCT) (-4 is Eastern
Daylight time).
4.
Make sure the
Use SNTP Server
checkbox has a green check. Touch
Use SNTP Server
to toggle
between the green check (use SNTP Server) and red X (do not use SNTP Server).
5.
Press
Get
to initialize time and verify that Time Synchronization is working.
6.
Touch
Set
to confirm date/time.
7.
Touch
Save
to save settings.
1111..44
S
SN
NM
MP
P
The STS supports SNMP over its Ethernet connection. The STS sends a single trap, a summary alarm, if any
alarm condition is raised on the STS. Touch the
SNMP
button on the
Home
Screen to display the
SNMP
Screen (
). Touch
MORE
to display additional buttons if
SNMP
button doesn’t show.
Содержание STS 2000A
