18
CEAG Remote Display for Central Power Supply Systems
40071860348 October 2019 www.ceag.de
Back
OK
Cancel
Back
OK
Cancel
Back
OK
Cancel
Back
OK
Cancel
Test
Faults and Events
Config Parameter
Display settings
System Info
Logout
Config saving ...
Admin Password
Set Successful
User Password
Set Successful
Config Parameters
Manual Control
Use joy-stick to access "Manual Control" where you
can manually control the connected Load (Output1 and
Output2).
Only non-maintained loads can be manually controlled (on/
off). If both outputs are set to non-maintained, you can
switch on/off both or individually. If one output is set to
Maintained, the output will show Maintained and it will
not be editable - output can't be switched off/on.
Change Password
Use joy-stick to access “Change Password” where
you can set a new password for “Admin” or “User”
(Housekeeper).
Use joy-stick up and down to go on Admin or User and
press joy-stick to select.
Admin can also set/change the password for the User
(housekeeper) account.
When exit “Config parameters” screen, it will show
“Config Saving…” message.
If Admin is deactivated, on every power on or when switch to Home screen
to Main Menu it will always enter into Admin Main Menu.
Manual Control
Output 1 & 2
Individual
Output 1
off
Output 2
off
Manual Control
Output 1 & 2
Individual
Output 1
ON
Output 2
off
Individual
ON
OFF
ON
OFF
Safety Input
FT DT Settings
Relay Output
Date and Time
System Power
Factory Default
Manual Control
Change Password
Main Menu
Change Password
Admin
User
Change Password
Admin
User
Change Password
Admin
User
Admin
Password:
******
User
Password:
******
Back
OK
Cancel
Back
OK
Cancel
Back
OK
Cancel
Back
OK
Cancel
Manual Control
