10
CEAG Remote Display for Central Power Supply Systems
40071860348 October 2019 www.ceag.de
4.2 Admin main menu
After Admin/User activation, additional menu features will be
available in the menu:
- Monitor
- Test
- Faults and Events
- Config. Parameters (only Admin)
- Features
- Display Settings
- System Info
- Block and Reset Alarm
- Language
- Manage Account
- Logout
4.2.1 Display settings
Use joy-stick to access Display Settings menu.
Here you can adjust brightness and contrast level, select
language, set buzzer function and adjust backlight On
time.
Brightness
Use joy-stick to select, adjust and store LCD brightness
level.
Contrast
Use joy-stick to select, adjust and store LCD contrast
level.
Buzzer
Use joy-stick to select, adjust and store buzzer functional-
ity. You can select out of four options: Mute, Low, Medium
and High.
By default, buzzer is muted. Enter Buzzer tab to activate
buzzer by selecting Low, Medium, High sound level. In
configuration mode the buzzer will sound for 2 seconds so
you can acknowledge the sound level. In case of an alarm
or fault the buzzer will sound for 5 seconds continuously
and LPS will show the respective LED information.
Backlight
Use joy-stick to set backlight switch off time.
By default, backlight is set to switch off after 2 minutes of
inactivity. Inactivity duration time can be configured from
1min to 10 min.
Main menu
Monitor
System info
Test
Faults and Events
Config Parameters
Features
Display settings
Mute
Low
Medium
High
Display settings
Brightness
55 %
Contrast
55
%
Buzzer
Low
Display settings
Brightness
55 %
Contrast
55
%
Buzzer
Mute
4.2 Admin main menu
